_edited_edited_.png)
MEDICAL GLUES: INSTRUCTIONS FOR USE
Instructions for use: PymTac, PymOver and PymGlue
FTM PROSTHETIC ADHESIVE
The flap is a silicone strip that is applied to the FTM Pymander - Packer - Packer Stand To Pee - Pack N' Play 3 in 1 - 4 in 1 Skin prostheses.
Adhesion is guaranteed thanks to the use of specific skin-safe, medical-grade, long-lasting glues.
Flaps
Thanks to its ergonomic shape, the flap adapts perfectly to application on the pubic area. It is included in the price and already present on the FTM 3 in 1, 4 in 1 and STP prostheses.
It is necessary to be depilated before applying the flap to the skin.
ATTENTION
Medical glue is NOT a substitute for boxers or harnesses, which are necessary to give the prosthesis the right support during sexual intercourse.
Each prosthesis has a variable weight that should not weigh on the pubic area without adequate support. Therefore, it is mandatory to use boxers or harnesses, specifically designed to support the prosthesis safely and comfortably.
PYMTAC
Instructions for use of PymTac medical glue.
ATTENTION: The glue must be reapplied after each use of the adhesive flap and its cleaning with the appropriate remover. For this reason we recommend using the glue sparingly, pouring 2-3 drops at a time and spreading it so as to completely cover the flap.
PREPARATION
Make sure your pubic area is HAIRED, this is a necessary step for the glue to adhere 100%.
APPLICATION
The red labeled glue bottle A has a dropper. Use it to distribute the glue onto the adhesive flap. Wait about 30 seconds to 1 minute. Apply the adhesive flap to the skin.
REMOVAL
Use the blue remover B to remove the adhesive flap and the glue from the skin. Slightly lift a flap of the adhesive flap and pour a few drops of remover. Wait for the remover to take effect and slowly remove the flap from the skin
PYMGLUE
Colla medica PymGlue A+ B bicomponente.
PREPARATION
Make sure your pubic area is HAIRED, this is a necessary step for the glue to adhere 100%.
APPLICATION
- Mix equal quantities of glue A and glue B in the transparent container provided.
- Apply glue to the flap.
- Wait about 30 seconds.
- Press the flap against the skin until it adheres completely.
REMOVAL
Pymglue does not require solvents to be removed from the skin and flap.